Em 10/04/2017 11:56, Robert Nelson escreveu:
On Sun, Apr 9, 2017 at 5:43 PM, Vinicius <[email protected]> wrote:
After a few attempts, I found that by positioning BB-UART2, on the line
below on /boot/uEnv.txt, , after BB-SPIDEV1, UART2 transmits!
Cape_enable = bone_capemgr.enable_partno =
BB-SPIDEV1,BB-UART1,BB-UART2,BB-UART4,BB-I2C1
I'm confused by this behavior, could anyone explain this?
kernel overlays are racy and can be hit and miss with a large number
of overlays.
Just convert to using U-Boot Overlays:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
Regards,
Thank you, Robert, I will see
Regards
Vinicius
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/53f6af2b-6614-df37-166e-27a706152159%40uol.com.br.
For more options, visit https://groups.google.com/d/optout.
