Robert: Looks like exactly what I want. I'll implement that. William: Thanks for your comments.
--- Graham == On Mon, Apr 17, 2017 at 5:03 PM, Robert Nelson <[email protected]> wrote: > On Mon, Apr 17, 2017 at 1:42 PM, Graham <[email protected]> wrote: > > I would like to build a revision to the current 2017-3-19 release > (Console > > version) that does not include the Cape Manager. > > > > I would like to get rid of the four blocked I2C memory addresses that are > > reserved by the kernel for the 'Cape Manager', but otherwise leave I2C-2 > > operational. > > > > So, first I think I need to modify and re-compile the default ".dts" file > > that is used by that release, to remove the binding for those four I2C > > addresses. > > > > It is just not obvious to me, which ".dts" that it is. > > > > > > I will then also need to inhibit what ever starts the 'Cape Manager.' > > Could you point me at that process. > > Hi Graham, > > This setup has been asked for before, so it's available in the repo: > > Grab the 4.4-ti branch from: > > https://github.com/RobertCNelson/dtb-rebuilder > > Change: > > https://github.com/RobertCNelson/dtb-rebuilder/blob/4.4-ti/src/arm/am335x- > boneblack.dts#L11 > > to: > > "am335x-bone-common-no-capemgr.dtsi" > > make > sudo make install > sudo reboot > > Regards, > > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CANN_KV47aPyY1SaWCwL0avzkiYzpeCe2VGSTAgRtSrTa-TtxYg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
