Hi,
I had my beagle bone black, which used to boot from my custom u-boot
and kernel. But now, It is unable to boot from the SD card for no apparent
reason.
The SD card is fine as I can mount ,read and modify files in the partition.
Observations:
1. SD card readable via a SD card reader over USB.
2. Boot flags set by gparted on the boot partition containing MLO and
u-boot.img
3. no "ccccccc" messages over serial connection. emmc is being used as a
boot source. I can make that out as I get a prompt even when I do not have
a rootfs on my SD card also I had kernel 3.10 compiled I get a 3.8 kernel
now..
4. USER LED 1 is not blinking. USER LED 0,2 are the one that are active.
can it be a fault with my switch S2 ? should I try to short the lines on
boot to create a switch press action ?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/9eb712b7-3995-4d41-94b2-7e762426a3fa%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
