Hi,
I am using the same toolchain as you. But I could not recreate the
problem that you faced.
I will list down my steps..
1. Clone the mainline u-boot . ( git clone git://git.denx.de/u-boot.git)
I have faced issues too with the ee-wiki sources, but the steps
more or less work with mainline sources too, just avoid the patches.)
2. make clean
3. make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
omap3_beagle_defconfig
4. make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
This did it for me, no issues faced.. have the MLO and u-boot.img
generated.
On Thursday, March 30, 2017 at 6:08:48 PM UTC+5:30, malkowki wrote:
>
> Hi,
>
> I have tried to compile the u-boot as described from Robert Nelson eewiki
> but I have ended up with the following compilation error after executing
> the following steps:
>
> make ARCH=arm CROSS_COMPILE=${CC} distclean
> make ARCH=arm CROSS_COMPILE=${CC} omap3_beagle_defconfig
> make ARCH=arm CROSS_COMPILE=${CC}
>
>
>
>
> LD spl/fs/built-in.o
> LDS spl/u-boot-spl.lds
> LD spl/u-boot-spl
> /home/mppdev/gcc-linaro-5.4.1-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-
> linux-gnueabihf-ld.bfd: u-boot-spl section `.rodata' will not fit in
> region `.sram'
> /home/mppdev/gcc-linaro-5.4.1-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld.bfd:
>
> region `.sram' overflowed by 3448 bytes
> make[1]: *** [spl/u-boot-spl] Error 1
> make: *** [spl/u-boot-spl] Error 2
>
> I am using VM running on Windows.
>
> Thanks for your help!
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/c1ff82c9-752a-46aa-8905-bbb090cdd2b8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
