Hello everybody! I'm using for a few years now your BeagleBone Black board to create an embedded device communicating with an Android phone with Bluetooth SPP profile. To achieve that, I connected a bluetooth module to UART and I used to communicate with it directly addressing the corresponding serial port in my Java application (sending AT commands for conf and exchanging data). I recently bought a BeagleBone Black Wireless since BT is already here (which is, by the way, a great idea!).
After a few days of investigation, I have not been able to setup my board so an external device connection is automatically redirected to a serial port I could use through my Java app. So here are my questions: 1. Is there any ways to achieve that using RFCOMM and BLUEZ? 2. Is there any ways I could deactivate Bluez and directly access the bluetooth module (then keeping doing things as I used to)? Please note that the board is not connecting the an external device. The external device connects to the board. I saw plenty of articles on how to go from the board to the device. But I'm looking for the other way! Thank you very much for your help!! Florian -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/881bb2ee-33e9-4567-becc-4cd55d24fec7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
