Andrea, Maybe this will solve your problem: https://www.adafruit.com/product/909
There are also panel mount USB pass through cables too. I'm not sure if adafruit has them, but if not amazon has them for sure. On Thu, Apr 27, 2017 at 9:59 AM, William Hermans <[email protected]> wrote: > Seems I was not awake, enough, before I read the post. But was still good > for a laugh while I was off in left field somewhere. But changing out > ethernet, *AND* USB for DIP connectors is still odd to me. I'll just chalk > that up to me not being an EE, and move on with my life. > > Andrea, OrCAD is a very expensive piece of software that requires a skill > set from an engineer who has spent years mastering the software, and > electronics design concepts in general. Normally, when changes are made to > a design of this nature, you're not going to get these changes made free of > charge. > > I only know this because my buddy has spent 30 + years in the electronics > field, and many years of that working with the OrCAD, or similar software. > Also keep in mind what I'm about to say is not an offer at all, but rather > a statement. He could make these changes, but because of his large time > investment using the software, and considerable amount of time studying > electronics in general. Those would not be free, or even cheap. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORrNoEOviyivfQTCGfJFDF%3Ds%3DXqsEHff_b9ac99c%2B-9OHA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
