> #include <dt-bindings/board/am335x-bbw-bbb-base.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/pinctrl/am33xx.h>
>
> /{
> compatible = "ti,beaglebone", "ti,beaglebone-black";
> part-number = "EBB-GPIO-Example";
> version = "00A0";
>
> fragment@0 {
> target = <&am33xx_pinmux>;
>
> __overlay__ {
> ebb_example: EBB_GPIO_Example {
> pinctrl-single,pins = <
> 0x070 0x07 // P9_11 PINS$28 GPIO0_30 = 30
> Output Mode7 pulldown
> 0x074 0x37 // P9_13 PINS$29 GPIO0_31 = 31
> Input Mode7 pullup
no reason for the 3 includes if your just going to hard code ^...
Regards,
--
Robert Nelson
https://rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAOCHtYgU%2B2_EQyikBS1AYqwn5C0PviZe58fXZN1bhkzrDP7EdA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
