Everyone, I have made it until the overlay loaded, but it's not doing the job properly, It's not changing the pinmux as instructed, what do I miss here ? What information do you need ? ======= root@beaglebone:/lib/firmware# dmesg | grep EBB [23193.563453] bone_capemgr bone_capemgr: part_number 'EBB-GPIO-Example.dtbo', version 'N/A' [23193.563558] bone_capemgr bone_capemgr: slot #5: 'Override Board Name,00A0,Override Manuf,EBB-GPIO-Example' [23193.604675] pinctrl-single 44e10800.pinmux: could not request pin 28 (44e10870.0) from group EBB_GPIO_Example on device pinctrl-single [23193.716995] pinctrl-single 44e10800.pinmux: could not request pin 28 (44e10870.0) from group EBB_GPIO_Example on device pinctrl-single [23193.746768] bone_capemgr bone_capemgr: slot #5: dtbo 'EBB-GPIO-Example-00A0.dtbo' loaded; overlay id #1 root@beaglebone:/lib/firmware# =======
Thanks in advance for the clue -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b8b3ea3e-1b16-4f5b-8969-49baeec9966f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
