On Wed, May 3, 2017 at 7:44 PM, michael c <[email protected]> wrote: > yeah, forgot the boot log > > > Press SPACE to abort autoboot in 2 seconds > board_name=[A335BNLT] ... > board_rev=[00C0] ... > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > ** Bad device 0:2 0x82000000 ** > ** Bad device 0:2 0x82000000 ** > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > gpio: pin 56 (gpio 56) value is 0 > gpio: pin 55 (gpio 55) value is 0 > gpio: pin 54 (gpio 54) value is 0 > gpio: pin 53 (gpio 53) value is 1 > switch to partitions #0, OK > mmc0 is current device > gpio: pin 54 (gpio 54) value is 1 > Checking for: /uEnv.txt ... > Checking for: /boot.scr ... > Checking for: /boot/boot.scr ... > Checking for: /boot/uEnv.txt ... > ** Invalid partition 2 ** > ** Invalid partition 3 ** > ** Invalid partition 4 ** > ** Invalid partition 5 ** > ** Invalid partition 6 ** > ** Invalid partition 7 ** > switch to partitions #0, OK > mmc1(part 0) is current device > Scanning mmc 1:1... > gpio: pin 56 (gpio 56) value is 0 > gpio: pin 55 (gpio 55) value is 0 > gpio: pin 54 (gpio 54) value is 0 > gpio: pin 53 (gpio 53) value is 1 > switch to partitions #0, OK > mmc1(part 0) is current device > gpio: pin 54 (gpio 54) value is 1 > Checking for: /uEnv.txt ... > Checking for: /boot.scr ... > Checking for: /boot/boot.scr ... > Checking for: /boot/uEnv.txt ... > gpio: pin 55 (gpio 55) value is 1 > 1853 bytes read in 18 ms (99.6 KiB/s) > Loaded environment from /boot/uEnv.txt > Checking if uname_r is set in /boot/uEnv.txt... > gpio: pin 56 (gpio 56) value is 1 > Running uname_boot ... > loading /boot/vmlinuz-4.4.62-ti-r99 ... > 8599176 bytes read in 563 ms (14.6 MiB/s) > uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot overlays is enabled^^^ > uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ... > loading /boot/dtbs/4.4.62-ti-r99/am335x-boneblack-uboot.dtb ... > 53128 bytes read in 28 ms (1.8 MiB/s) > uboot_overlays: [fdt_buffer=0x60000] ... > uboot_overlays: loading /lib/firmware/AM335X-20-00A0.dtbo ... > 378 bytes read in 40 ms (8.8 KiB/s) > uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... > 1105 bytes read in 171 ms (5.9 KiB/s) > uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... > 4169 bytes read in 165 ms (24.4 KiB/s) > uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... > 695 bytes read in 37 ms (17.6 KiB/s) > uboot_overlays: loading /lib/firmware/univ-bbb-EVA-00A0.dtbo ... Cape Universal is loaded, E(mmc), V(video/hdmi), A(audio/hdmi) pins are Un-Available.. > 54726 bytes read in 73 ms (731.4 KiB/s) > loading /boot/initrd.img-4.4.62-ti-r99 ... > 6328001 bytes read in 419 ms (14.4 MiB/s) > debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 > root=UUID=7b2b27e9-0af3-479f-b022-cd2642d6d1cd ro rootfstype=ext4 rootwait] > ... > debug: [bootz 0x82000000 0x88080000:608ec1 88000000] ... > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > Loading Ramdisk to 8f9f7000, end 8ffffec1 ... OK > reserving fdt memory region: addr=88000000 size=75000 > Loading Device Tree to 8f97f000, end 8f9f6fff ... OK > ................ > [ 4.002095] bone_capemgr bone_capemgr: Baseboard: > 'A335BNLT,00C0,2916BBBK1D39' > [ 4.009614] bone_capemgr bone_capemgr: > compatible-baseboard=ti,beaglebone-black - #slots=4 > [ 4.018121] bone_capemgr bone_capemgr: slot #0: auto loading handled by > U-Boot > [ 4.025470] bone_capemgr bone_capemgr: slot #1: auto loading handled by > U-Boot > [ 4.032803] bone_capemgr bone_capemgr: slot #2: auto loading handled by > U-Boot > [ 4.040094] bone_capemgr bone_capemgr: slot #3: auto loading handled by > U-Boot Another hint, that u-boot "has" control Here is the background: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays In it's current state, you can use "config-pin" to dynamicly change pins. Let us know "what" pin's you want to change or what cape you want to load and we can walk you thru it. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiTLzAqeRY%2B0Xdv1601dxLZxxYuNkmH7UYXyUwVjEU%3D0w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
