You're probably not going to get a responce until you give the exact source you're having problems with, and the commands used to compile from source.
On Fri, May 5, 2017 at 2:32 PM, <cjohn...@zincfive.com> wrote: > We are using a Beaglebone Black rev-C and need to have both DCAN1 and some > of the GPIOs enabled at the same time. > > So we've tried loading both the BB-CAN1-00A0 and the univ-emmc-00A0 > overlays. That of course does not work since P9.24 and P9.26 conflict > between the two. So I modified univ-emmc-00A0.dts to not configure P9.24 > and P9.26. > > Both overlays load and the GPIOs work fine. But dcan1 does not. If I do > not load univ-emmc-00A0 and only load BB-CAN1-00A0, dcan1 works great but I > loose my GPIOs. > > CAN also does not work if I just load univ-emmc-00A0 and manually > configure P9.24 and P9.26 to "can" using the config-pin script. > (Not working means no data transferred when monitoring with a logic > analyzer.) > > Since this is my first time with dts files, I must be missing something > here. Any hints would be appreciated. > > --Charles Johnson > > > > > > DISCLAIMER: This email correspondence and any attachments may contain > confidential and privileged information intended only for the use of the > designated recipient(s) listed above and is the property of ZincFive, Inc. > If you are not the intended recipient(s) of this message, you are hereby > notified that any disclosure, copying, distribution or the taking of any > action in reliance on the contents of this information is prohibited. If > you are not the intended recipient of this email, please notify the sender > immediately. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/7b4fa5fc-bbdf-4eeb-8998-23a2d25f0aff%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/7b4fa5fc-bbdf-4eeb-8998-23a2d25f0aff%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORpYSURQDMyG4F5irsWDmUWidv-Ygi7%3Dy9LsgaPq%2B3R5oQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.