.. same here. BB Blue was in the process of booting with usb-power. Attached to the board was:
- an Adafruit GPS module (GPS connector) - six NAZA ESC, data and GND pinned to the 8x3header (1..6), flight power battery to the ESC unconnected. - one Spektrum satellite receiver to E4 connector there was no battery attached to the bb blue LIPO connector. When I plugged in a 12V from an AC/DC Adapter to the barrel connector the LIPO charger IC smoked away. I powered up this collection several times before, even flew the copter a few seconds. Anyway in the schematic I cannot find a plausible cause for a high current at that situation. What a disappointment. Jo -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/210889d3-babc-4729-8733-3c355b0e9a94%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
