As an additional datapoint, I also see identical messages appearing in the output of dmesg
--Luther On Wednesday, May 10, 2017 at 3:39:49 AM UTC+8, Luther Goh Lu Feng wrote: > > I have connected a console session using a serial console cable[1], on a > custom Debian Jessie console image. Watchdog has been enabled using echo 1 > > /dev/watchdog > > but this produces a series of console messages that makes the console > difficult to use: > > watchdog watchdog0: watchdog did not stop! > > > Image attached for clarity. I can still login at the console login prompt > if I dont get confused by all the messages. > > Question: is this a known issue, and how do I prevent those messages from > appearing? > > [1] > http://www.dummies.com/computers/beaglebone/how-to-connect-the-beaglebone-black-via-serial-over-usb/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c1875742-cc6f-41da-a96c-0311ebf02311%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
