On May 13, 2017 12:11 PM, "William Hermans" <[email protected]> wrote:
So I usually use this method: On Beaglebone: root@wgd:~# cat /etc/dogtag BeagleBoard.org Debian Image 2017-04-02 On Debian support system: william@eee-pc:~$ unxz bone-debian-8.7-console-armhf-2017-04-02-1gb.img.xz william@eee-pc:~$ file bone-debian-8.7-console-armhf-2017-04-02-1gb.img bone-debian-8.7-console-armhf-2017-04-02-1gb.img: x86 boot sector; partition 1: ID=0x83 , active, starthead 130, *startsector 8192*, 1732608 sectors, code offset 0x0 I forget if fdisk will also give this information or not, but it should if you run fdisk -l /dev/<device name>. However, running this on a live partition may not work ? Let's find out. root@wgd:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk1boot0 179:8 0 2M 1 disk mmcblk1boot1 179:16 0 2M 1 disk mmcblk1 179:0 0 3.7G 0 disk `-mmcblk1p1 179:1 0 3.7G 0 part / root@wgd:~# fdisk -l /dev/mmcblk1 Disk /dev/mmcblk1: 3.7 GiB, 3909091328 bytes, 7634944 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/mmcblk1p1 * *8192* 7634943 7626752 3.7G 83 Linux And SOC.sh says . . . root@wgd:~# cat /boot/SOC.sh #!/bin/sh format=1.0 board=am335x_evm bootloader_location=dd_spl_uboot_boot bootrom_gpt= dd_spl_uboot_count=1 dd_spl_uboot_seek=1 dd_spl_uboot_conf=notrunc dd_spl_uboot_bs=128k dd_spl_uboot_backup=/opt/backup/uboot/MLO dd_uboot_count=2 dd_uboot_seek=1 dd_uboot_conf=notrunc dd_uboot_bs=384k dd_uboot_backup=/opt/backup/uboot/u-boot.img boot_fstype=ext4 *conf_boot_startmb=4 ???* conf_boot_endmb= sfdisk_fstype=L boot_label=BOOT rootfs_label=rootfs #Kernel dtb= serial_tty=ttyO0 usbnet_mem= I'm assuming this is file is marked executable so it can be "sourced" ? Correct that's the file, I source it in the grow_partition.sh and update_bootloader.sh across. Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgKHSw3ezx939w%2Beo6OaCgm8FXXZksDor22CXvUq8t8JA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
