On Thursday, May 11, 2017 at 6:28:42 PM UTC-5, Mark Copper wrote: > > Could be broken hardware as well. OTOH BBBW did work out of the box but > networking failed after kernel update while everything else seems OK. > > Symptoms: Immediately after flashing image, ifconfig and ip show usb > interfaces but not wlan0--same as when booting from SD card. Later network > probe processes hang and do not return (ip, ifconfig, lshw for example, but > not lsusb). Nor can these processes be killed. > > Would like to know if anyone else is seeing this. Would also be glad to > provide additional information. I also have additional BBBW cards so could > try to duplicate. > > Hope I'm not too far off base. Thanks for reading. >
For the record this appears to have been a hardware problem--I had no trouble flashing a new BBBW with the same SD image. Apologies for the noise. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4932aa07-a741-4b49-a9f3-997cf44aca8e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
