Thanks Robert, I actually enabled the BB-UART 4 in the uEnv.txt and the HDMI stopped working. Are the CATS,RTS enabled by default ? How do I check which dto is being used ?
On May 15, 2017 7:59 PM, "Robert Nelson" <[email protected]> wrote: > On Mon, May 15, 2017 at 5:58 AM, rj-ib-23 <[email protected]> > wrote: > > Hello All > > > > I understand that The CTS and RTS pins of UART 4 are used in the HDMI > > Virtual Cape. I wanted to check if it is possible to use UART 4 TX and Rx > > pins only and also the HDMI Cape simultaneously. I donto have any > > requirement for the CTS and RTS pins. Will it be possible to customize > the > > device tree to have only the Rx,Tx pins of UART4 and HDMI work > > simultaneously ? > > Yes you can use uart4's rx/tx with the display active: > > P9_11 (uart4_rx) > P9_13 (uart4_tx) > > aren't allocated for video. > > https://github.com/beagleboard/bb.org-overlays/ > blob/master/src/arm/BB-UART4-00A0.dts > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGTuzRCBpsyDGNwgK9sJqCtEuaFZ1ZWsfHMuQXpDSaAwPQ60UQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
