On 05/16/17 17:17, Greg Ercolano wrote:
> On 05/16/17 16:56, [email protected] wrote:
>> I did notice a few error messages using the OP's disk image + script..
>> [..]
>> Unpacking linux-image-4.4.27-ti-r62 (1jessie) ...
>> Setting up linux-image-4.4.27-ti-r62 (1jessie) ...
>> Error! Error! Your kernel headers for kernel 4.4.27-ti-r62 cannot be found.
>> <--
>> Please install the linux-headers-4.4.27-ti-r62 package,
>> <--
>> or use the --kernelsourcedir option to tell DKMS where it's located
>> <--
>> Your kernel headers for kernel 4.4.27-ti-r62 cannot be found.
>> <--
>> Please install the linux-headers-4.4.27-ti-r62 package,
>> <--
>> or use the --kernelsourcedir option to tell DKMS where it's located
>> <--
>
> [..]
> In my case, after the reboot, I noticed the active kernel was the new one
> the prep script downloaded (4.4.27), as reported by 'uname -r'..
> so this seemed to be the appropriate command to install those headers:
>
> apt-get install linux-headers-`uname -r`
> [..]
> Will try to follow up with what I find..
Hmm, so after the new kernel headers were installed, I verified
there's now a 'build' link in the modules directory for that kernel version
that wasn't there before:
# ls -la /lib/modules/4.4.*/build
lrwxrwxrwx 1 root root 36 Oct 26 2016 /lib/modules/4.4.27-ti-r62/build ->
/usr/src/linux-headers-4.4.27-ti-r62 <--
lrwxrwxrwx 1 root root 35 May 5 2016 /lib/modules/4.4.9-ti-r25/build ->
/usr/src/linux-headers-4.4.9-ti-r25
..which is good, because I know building device drivers need that link
to exist.
So I then retried making the project the prep_pru.sh command failed to
build,
but still getting these weird errors:
root@beaglebone:~# export DTB=~/dtb-rebuilder/src/arm
root@beaglebone:~# cd /root/dtb-rebuilder/
root@beaglebone:~/dtb-rebuilder# make clean
CLEAN src/arm
root@beaglebone:~/dtb-rebuilder# make
DTC src/arm/am437x-gp-evm.dtb
FATAL ERROR: Unrecognized check name "unit_address_vs_reg" <--
Makefile:136: recipe for target 'src/arm/am437x-gp-evm.dtb' failed <--
make[1]: *** [src/arm/am437x-gp-evm.dtb] Error 1
Makefile:84: recipe for target 'all_arm' failed
make: *** [all_arm] Error 2
Does anyone know the solution for that?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/591B9AFB.3090004%40seriss.com.
For more options, visit https://groups.google.com/d/optout.
