Thanks, Robert. I will give that a shot. I appreciate all the effort you've put into this! Sincerely, Paul
On Mon, May 22, 2017 at 1:55 PM, Robert Nelson <[email protected]> wrote: > Hi Paul, > > On Mon, May 22, 2017 at 6:17 AM, Paul Carpenter <[email protected]> wrote: > > Hi all, > > I am using the BeagleBone Enhanced from SanCloud and using it for several > > IOT related projects. We have used the stable March build with success > but > > we just recently added the latest LCD touch display from NewHaven. In > order > > to get that to work, we went to the latest test image (5/14/2017) from > the > > WiKi. It seems the onboard Ethernet connection no longer works. The > 'eth0' > > interface is recognized and is set up as a DHCP client. It sends the IP > > request out and the DHCP server responds. However, it appears the BBBe's > > driver/firmware does not process the response. Using a static IP address > > doesn't work nor does the latest console or LXQT images. > > > > Any thoughts? I know this image is a test image and I saw a note that the > > SanCloud BBBe needs work and more testing. I am wondering if a > work-around > > has been found. > > Yeah i hadn't completely finished porting all the clone boards to > u-boot overlays. > > I just finished the SanCloud for you and Marc this morning.. It'll be > a few days, (kernel builders are behind as 4.12.0-rc2 is being worked > on), till i have a new out of the box image. > > But to get your board working now/today, follow these 7 steps..: > > ************************************************************ > ********************** > 1: remove NewHaven display > 2: bootup, login, disable "enable_uboot_overlays=1" > > sudo sed -i -e 's:enable_uboot_overlays=1:#enable_uboot_overlays=1:g' > /boot/uEnv.txt > > 3: reboot (this will boot the old device tree) and ethernet should work. > > 4: update Device Tree's > > cd /opt/source/dtb-4.4-ti/ > debian@beaglebone:/opt/source/dtb-4.4-ti$ git pull > remote: Counting objects: 10, done. > remote: Compressing objects: 100% (5/5), done. > remote: Total 10 (delta 4), reused 10 (delta 4), pack-reused 0 > Unpacking objects: 100% (10/10), done. > From https://github.com/RobertCNelson/dtb-rebuilder > 3bff3bd..3b44f63 4.4-ti -> origin/4.4-ti > Updating 3bff3bd..3b44f63 > Fast-forward > src/arm/am335x-boneblack-ctag-face.dts | 10 +- > src/arm/am335x-bonegreen-ctag-face.dts | 10 +- > src/arm/am335x-sancloud-bbe-common.dtsi | 466 ++++++++++++++++++++ > src/arm/am335x-sancloud-bbe-uboot.dts | 26 ++ > src/arm/am571x-sndrblock-common.dtsi | 749 > ++++++++++++++++++++++++++++++++ > src/arm/am571x-sndrblock.dts | 125 ++++++ > 6 files changed, 1376 insertions(+), 10 deletions(-) > create mode 100644 src/arm/am335x-sancloud-bbe-common.dtsi > create mode 100644 src/arm/am335x-sancloud-bbe-uboot.dts > create mode 100644 src/arm/am571x-sndrblock-common.dtsi > create mode 100644 src/arm/am571x-sndrblock.dts > debian@beaglebone:/opt/source/dtb-4.4-ti$ make > debian@beaglebone:/opt/source/dtb-4.4-ti$ sudo make install > > 5: update U-Boot > > $ cd /opt/scripts/tools/developers/ > debian@beaglebone:/opt/scripts/tools/developers$ git pull > Already up-to-date. > debian@beaglebone:/opt/scripts/tools/developers$ sudo > ./update_bootloader.sh > bootloader:[/dev/mmcblk1]:[U-Boot 2017.05-00002-gc0970ed183] > > <noise> > > ----------------------------- > Bootloader Updated > Bootloader Recovery Complete > > 6: reboot and verfy U-Boot (2017.05-00002-gc0970ed183 this is today's > build that specifically add the SanCloud BBE to the u-boot overlays) > > Option A: (if you have a serial cable) > > ************************************************************ > ********************** > U-Boot SPL 2017.05-00002-gc0970ed183 (May 22 2017 - 11:14:48) > Trying to boot from MMC2 > > U-Boot 2017.05-00002-gc0970ed183 (May 22 2017 - 11:14:48 -0500), > Build: jenkins-github_Bootloader-Builder-556 > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 1 GiB > Reset Source: Global warm SW reset has occurred. > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Board: BeagleBone Black > Model: SanCloud BeagleBone Enhanced > ************************************************************ > ********************** > > Option B: (if you don't have a serial cable) > > $ cd /opt/scripts/tools/ > debian@beaglebone:/opt/scripts/tools$ sudo ./version.sh | grep bootloader > [sudo] password for debian: > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > 2017.05-00002-gc0970ed183] > > 7: Re-Enable "enable_uboot_overlays=1", shutdown, and re-install the > New HavenCape > > sudo sed -i -e 's:#enable_uboot_overlays=1:enable_uboot_overlays=1:g' > /boot/uEnv.txt > sudo systemctl poweroff > > ************************************************************ > ********************** > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGsnc0H3ufdGWbUCCPSwbdAO-xpkgHC1D997s3O6OQprFwcOrA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
