On Thu, Jun 1, 2017 at 12:38 PM, Custom AM5718 <[email protected]> wrote: > We're investigating some code over to use the PRU, I think we'll still > target 4.4x > > So far everything looks fine... eeprom and tree works > > We had to patch our dts to add the pcie1 back in. We can do a merge request > later once we get past the firmware load issue > > &pcie1_rc { > status = "okay"; > gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; > }; > > > &pcie1_ep { > gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; > }; > > > lspci is showing the bus and the 3160HMW. The firmware is giving us some > problems, might be an intel thing however: > >> dmesg > [ 4.534104] iwlwifi 0000:01:00.0: enabling device (0140 -> 0142) > [ 4.555571] iwlwifi 0000:01:00.0: Direct firmware load for > iwlwifi-3160-17.ucode failed with error -2 > [ 4.615862] iwlwifi 0000:01:00.0: loaded firmware version 16.242414.0 > op_mode iwlmvm > [ 4.731836] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC > 3160, REV=0x164 > [ 4.732966] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled > [ 4.733210] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled > [ 11.502283] iwlwifi 0000:01:00.0: Failed to load firmware chunk! > [ 11.508349] iwlwifi 0000:01:00.0: Could not load the [0] uCode section > [ 11.516889] iwlwifi 0000:01:00.0: Failed to start INIT ucode: -110 > [ 11.523155] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -110 > [ 11.542398] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled > > [ 11.557883] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
I'll need to back port that into jessie.. https://packages.debian.org/search?suite=stretch&arch=any&searchon=contents&keywords=iwlwifi-3160-16.ucode But you guys really want xenial right? https://packages.ubuntu.com/search?suite=xenial&arch=any&mode=exactfilename&searchon=contents&keywords=iwlwifi-3160-16.ucode ubuntu: linux-firmware Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYje2eZU9GNrx6MvTa_Mx4Le0gGcvEDWmtmfyabW4eBByg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
