Hi, I am working at a university project at the moment. The Project should contain a BeagleBoneBlack, witch streams a video signal (analog PAL) from a video grabber over a website on a local Webserver via Wlan to a tablet or something else.
There are a lot of tutorials on the internet. I have testet a lot of them until I have decided to ask for help. My skills regarding the BeagleBoneBlack and the programming with linux are moderate. I use an BeagleBoneBlack and an USB-Wireless stick with the Ralink RT5370 Chipset. This was the link of the tutorial on the internet: https://fleshandmachines.wordpress.com/2012/10/04/wifi-acces-point-on-beaglebone-with-dhcp/ After the application of the tutorial i get these error: Configuration file: /etc/hostapd/hostapd.conf nl80211: Could not configure driver mode nl80211: deinit ifname=wlan0 disabled_11brates=0 nl80211: driver initialization failed. wlan0: interface state UNINITALIZed -> DISABLED wlan0: AP-DISABLED hostapd_free_hapd_data: Interface wlan0 wasn't started Excuse me for my English skills and Thanks and best wishes Alex -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f7f088b8-4a01-46b0-a5e5-04dc39cc6ba0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
