1. Using a serial console, I get the following output: ---------------------------------- U-Boot SPL 2017.01-00341-gb2aad42503 (Jun 21 2017 - 10:56:05) DRA752-GP ES1.1 Trying to boot from MMC1
** Unable to use mmc 0:1 for loading the env ** Using default environment U-Boot 2017.01-00341-gb2aad42503 (Jun 21 2017 - 10:56:05 -0500), Build: jenkins-github_Bootloader-Builder-581 CPU : DRA752-GP ES1.1 Model: TI AM5728 BeagleBoard-X15 Board: BeagleBoard X15 REV A.20 DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** Unable to use mmc 0:1 for loading the env ** Using default environment setup_board_eeprom_env: beagle_x15 SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: <ethaddr> not set. Validating first E-fuse MAC cpsw Press SPACE to abort autoboot in 2 seconds usb_boot is currently disabled scsi_boot is currently disabled switch to partitions #0, OK mmc0 is current device Scanning mmc device 0 Checking for: /uEnv.txt ... Checking for: /boot/uEnv.txt ... 445 bytes read in 395 ms (1000 Bytes/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt ... debug: [uname_r=4.9.33-ti-r42] ... loading /boot/vmlinuz-4.9.33-ti-r42 ... 9530640 bytes read in 96459 ms (95.7 KiB/s) loading /boot/dtbs/4.9.33-ti-r42/am57xx-beagle-x15.dtb ... 152761 bytes read in 1969 ms (75.2 KiB/s) loading /boot/initrd.img-4.9.33-ti-r42 ... 5913007 bytes read in 59990 ms (95.7 KiB/s) debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:5a39af 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fa5c000, end 8ffff9af ... OK Loading Device Tree to 8fa33000, end 8fa5b4b8 ... OK Starting kernel ... ---------------------------------------------------- It seems that the loading of the kernel and initrd from the SD card is rather slow (95KB/s), wonder why. 2. Also, the second issue (alloc_contig_range) seems to happen about 1000 seconds in after the system boots. These messages start slow initially (once every 30 seconds or so) but become more frequent with time, until they block everything. On Mon, Jun 26, 2017 at 12:44 PM, Kumar Abhishek < [email protected]> wrote: > I have Rev A2 of the X15, and the kernel logs say that it is a DRA752 > ES1.1 silicon. > > On Sun, Jun 25, 2017 at 11:09 PM, Robert Nelson <[email protected]> > wrote: > >> Hi Kumar, what do you have plugged in? Which rev of the x15? I had >> tested this image on Friday, it was working for me on the new x15 (sr 2.0 >> silicon) >> >> Regards, >> >> On Jun 25, 2017 11:44 AM, "Kumar Abhishek" <[email protected] >> om> wrote: >> >>> I have two issues working with the latest BeagleBoard Stretch image on >>> the BeagleBoard X15. >>> >>> ( I used image under both https://rcn-ee.net/rootfs >>> /bb.org/testing/2017-06-22/stretch-lxqt/ and https://rcn-ee.net/rootfs/ >>> bb.org/testing/2017-06-18/stretch-lxqt/ ) >>> >>> 1. The bootup from microSD card containing the image happens only after >>> roughly 3-4 minutes, the board is unresponsive until then. I don't know why >>> this is happening but this did not happen with a Jessie image ( the board >>> boots immediately ) >>> >>> 2. The syslog is getting spammed with log messages like this, and it >>> fills up the entire space on the microSD card, to the point I can no longer >>> do anything: >>> >>> [ 4906.387892] alloc_contig_range: [fceb1, fceb2) PFNs busy >>> [ 4906.387951] alloc_contig_range: [fceb2, fceb3) PFNs busy >>> [ 4906.388082] alloc_contig_range: [fceb3, fceb4) PFNs busy >>> [ 4906.388152] alloc_contig_range: [fceb4, fceb5) PFNs busy >>> [ 4906.388251] alloc_contig_range: [fceb5, fceb6) PFNs busy >>> [ 4906.388307] alloc_contig_range: [fceb6, fceb7) PFNs busy >>> [ 4906.540999] alloc_contig_range: [fceb0, fceb1) PFNs busy >>> [ 4906.541076] alloc_contig_range: [fceb1, fceb2) PFNs busy >>> [ 4906.541135] alloc_contig_range: [fceb2, fceb3) PFNs busy >>> [ 4906.541195] alloc_contig_range: [fceb3, fceb4) PFNs busy >>> [ 4906.541253] alloc_contig_range: [fceb4, fceb5) PFNs busy >>> [ 4906.541311] alloc_contig_range: [fceb5, fceb6) PFNs busy >>> [ 4906.541369] alloc_contig_range: [fceb6, fceb7) PFNs busy >>> [ 4906.549392] alloc_contig_range: [fceb0, fceb1) PFNs busy >>> [ 4906.549539] alloc_contig_range: [fceb1, fceb2) PFNs busy >>> [ 4906.549599] alloc_contig_range: [fceb2, fceb3) PFNs busy >>> [ 4906.549654] alloc_contig_range: [fceb3, fceb4) PFNs busy >>> [ 4906.549708] alloc_contig_range: [fceb4, fceb5) PFNs busy >>> [ 4906.549762] alloc_contig_range: [fceb5, fceb6) PFNs busy >>> [ 4906.549816] alloc_contig_range: [fceb6, fceb7) PFNs busy >>> >>> I wanted to bring these to your notice. >>> >>> Thanks >>> Kumar Abhishek >>> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CADK6UNHdqr5FLm%2BZPfiwqpnaW7cAjqq7_cWy_mHJM5UoeRZCWg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
