Linux Procedural Question..
******************************** I haven't yet been able to find any forums talking about experience with the I2C patch for the max 310x.c driver. The link below to the patch thread contains the email addresses of the patch authors. ??Is it acceptable to contact the patch authors directly by email for questions relating to: · -Soak time of the driver. · -Known reliability issues. · -Known gotchas Thanks!!! On Friday, June 23, 2017 at 11:47:26 AM UTC-5, Jeff Andich wrote: > > Hi, > > We're adding UART ports to a custom am5728-based board with a Maxim 3107 > I2C<-> UART chip. > > > Does anyone have experience with the Maxim 3107 chip and the associated > driver (max310x) for UART over I2C on the BeagleBone, BeagleBoard, etc? If > so, what issues have you encountered? > > > Thus far, I've only found the following. I haven't yet found anyone > posting issues on the driver and/or the chip. > > > > https://github.com/torvalds/linux/commit/6286767ad3afc886ec6473409aa02191cb54f97b > > > Patch for adding I2C<->UART functionality to the Linux driver: > > https://patchwork.ozlabs.org/patch/666958/ > > > > Thanks in advance! > > > Jeff > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/de0aaf71-d340-4265-b4c1-d2d4d70402ca%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
