On Friday, June 30, 2017 at 10:09:34 AM UTC-5, Eric Keller wrote: > > machinkit isn't linuxcnc. There is a machinekit mailing list on google > groups where you probably can get help with this. > https://groups.google.com/forum/#!forum/machinekit > Looks like a path problem to me, but PNCconf has always worked out of the > box for me. > > > > Stepconf is a program to create a config to control stepper motors via an X86 PC's parallel port. There is a different program used for machinekit, and it uses the PRU devices to generate steps. Unfortunately, Machinekit is not as well documented as LinuxCNC, and this is the one area where the differences are great.
Jon -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a91a5cd4-de62-4410-9070-89e9a0a50e5a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
