Hi, I am facing the same issue with MIPS64. Did you happen find the way to resolve this issue, if yes please share the way?
On Friday, September 26, 2008 at 10:55:01 PM UTC+5:30, Sairam S wrote: > > Hi , > > > > We are trying to use the BDI3000 to debug software on Beagle board . But > we are not able to debug the board . > > We have used b30allgd.108 firmware file and Omap35xx.cfg and Reg3500.def > files for configuration of BDI . > > > > But the error we are getting is > > -TARGET:BDI executes scan chain init string -TARGET:Bypasscheck > > 0x0000001->0xffffffff -TARGET:JTAG exists check failed # > > -TARGET:resetting target failed # JTAG:Communication with target failed . > > > > We have also modified the cable connecting from BDI (TARGET A ) to Beagle > board , w.r.t to the connections of TI and BDI documentation .Thew > configuration used is atatched here . > > > It worked for a while when we changed the WAKEUP delay to 8000, but could > not get connected every time we power on . > > The connection details are as follows . > > > > BDI BEAGLE JTAG SIGNALS > > 9 5 VCC > > 7 2 TRST > > 8 3 TDI > > 6 1 TMS > > 4 11 TCK > > 10 7 TDO > > 3,5 4,8 GND > > > > Kindly let us know where we are going wrong . > > > > > > Thanks & regards , > > Sairam.S > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e77ea27e-8990-4211-bf26-7b9c719b5346%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
