That's easy. Here is before and after plugging in USB flash stick: debian@beaglebone:~$ lsusb Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub debian@beaglebone:~$ lsusb Bus 001 Device 003: ID 058f:6387 Alcor Micro Corp. Flash Drive Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub debian@beaglebone:~$
So it does detect the USB device. However, I didn't find the drive mounted in the usual places like /mnt or /media. So that has to be done manually with the mount command? Or maybe I wasn't looking in the correct folder. Here is snippet of dmesg: [651120.233538] usb 1-1.3: new high-speed USB device number 3 using musb-hdrc [651120.475757] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6387 [651120.475820] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [651120.475854] usb 1-1.3: Product: Mass Storage [651120.475883] usb 1-1.3: Manufacturer: Generic [651120.475911] usb 1-1.3: SerialNumber: D339585D [651120.492014] usb-storage 1-1.3:1.0: USB Mass Storage device detected [651120.505619] scsi host0: usb-storage 1-1.3:1.0 [651120.637632] usbcore: registered new interface driver uas [651121.509778] scsi 0:0:0:0: Direct-Access CENTON 8.07 PQ: 0 ANSI: 2 [651121.527501] sd 0:0:0:0: [sda] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB) [651121.528032] sd 0:0:0:0: [sda] Write Protect is off [651121.528080] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [651121.528546] sd 0:0:0:0: [sda] No Caching mode page found [651121.534237] sd 0:0:0:0: [sda] Assuming drive cache: write through [651121.701820] sd 0:0:0:0: Attached scsi generic sg0 type 0 [651123.541720] sda: sda1 [651123.555958] sd 0:0:0:0: [sda] Attached SCSI removable disk Looks good to me, but this is the first time I ever plugged a USB disk into a Beaglebone! Regards, Greg -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a3059dd9-9661-49bf-9019-503e16e5a77d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
