Kai, do you remember what's here on this link you posted since its content has been deleted? It would really be helpful.
On Thursday, November 26, 2009 at 5:10:33 AM UTC+8, kai wrote: > > It looks like you don't have a current version of U-Boot flashed into > NAND. > > If you follow the directions on this page: > http://code.google.com/p/beagleboard/wiki/BeagleboardRevCValidation > > downloading the files mentioned and copying them to the SD card in the > order given, renaming them as shown, then this will flash a newer > version of U-Boot to your beagleboard. > > See if that helps with your issue. > > Cheers, > Kai > > > On 26/11/2009, at 4:47 AM, Liam Ed wrote: > > > I can boot OK initially from my SD card. However when I reet the board > > i get the following error > > > > Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - > > 12:01:24) > > Reading boot > > sector > > Loading u-boot.bin from > > mmc > > > > > > U-Boot 2009.01-dirty (Feb 17 2009 - > > 18:07:13) > > > > I2C: > > ready > > OMAP3530-GP rev 2, CPU-OPP2 > > L3-165MHz > > OMAP3 Beagle board + LPDDR/ > > NAND > > DRAM: 256 > > MB > > NAND: 256 > > MiB > > Using default > > environment > > > > MUSB: using high > > speed > > In: serial > > usbtty > > Out: serial > > usbtty > > Err: serial > > usbtty > > Board revision > > C > > Serial > > #0a4a000300000000040323090e00c006 > > Hit any key to stop autoboot: > > 0 > > reading > > boot.scr > > Invalid FAT > > entry > > > > ** Unable to read "boot.scr" from mmc 0:1 > > ** > > reading > > uImage.bin > > Invalid FAT > > entry > > > > ** Unable to read "uImage.bin" from mmc 0:1 > > ** > > Booting from > > nand ... > > > > NAND read: device 0 offset 0x280000, size > > 0x400000 > > 4194304 bytes read: > > OK > > Wrong Image Format for bootm > > command > > ERROR: can't get kernel > > image! > > OMAP3 beagleboard.org # > > > > -- > > > > You received this message because you are subscribed to the Google > > Groups "Beagle Board" group. > > To post to this group, send email to [email protected] > <javascript:>. > > To unsubscribe from this group, send email to > [email protected] <javascript:> > > . > > For more options, visit this group at > http://groups.google.com/group/beagleboard?hl=en > > . > > > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/63041fae-9e91-476c-b1fa-794afc01194f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
