On Sun, Jul 9, 2017 at 10:53 AM, marty leisner <[email protected]> wrote: > Different postings seem to indicate different things. > > I've been using u-boot for over a decade and I'm used to the saveenv/fw_* > tools. > > Seems the default beagles don't support this. I have a older 2G eMMC and a > newer 4G eMMC beagle -- I just built uboot and that and the distributed one > don't have saveenv present. > > The uboot I built was from the instructions here: > https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot > > > But this posting: > > https://e2e.ti.com/support/embedded/linux/f/354/t/425207 > > talks about fw_* tools and saveenv. > > I'm slightly confused.
saveenv is disabled as it breaks the BeagleBone White (no eMMC) you can easily re-enable by removing this change: https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v2017.07/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch#L250 Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYib%2BDdWLdTZFAuxNM5uLXMgUJbAW2E2jK-KiBHwN%3DgnJA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
