On Sunday, July 9, 2017 at 2:08:38 PM UTC-4, Jeff Albrecht wrote: > > FWIW I just made an assumption that luckily didn't fry my 'blue. I bought > some of the Hobby King 6-wire JST-SH pre wired assemblies listed in the > FAQ > <https://github.com/beagleboard/beaglebone-blue/wiki/Accessories#spi-gpio-adc>. > > There is one black wire and five white wires. I assumed the black wire on > the left to be ground. Looking at the SPI connector on the board, oriented > with the servo connector to the right, the ground is actually the right > most pin not the leftmost wire which is black. > > Jason, I'll leave it to you if the following sentence would be helpful for > the Cable assemblies and sub-assemblies > <https://github.com/beagleboard/beaglebone-blue/wiki/Accessories#Cable_assemblies_and_subassemblies> > section > of the FAQ. > > "Beware; purchased pre-made connector assembly wire colors may not reflect > true pin designations." >
Added. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/74ed9d62-09f4-49bf-889b-dc4f757190c7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
