okay i tried it and unfortunately it didn't work , all pin from 27-46 were on mux 0 mode which they should be to get lcd working . i think there should be some configuration i need to do in some file. anyone have any idea about that? what should i do apart from just setting pins??? And yeah i did not touch HDMI plug at all during this process.
On Mon, Jul 17, 2017 at 11:21 AM, Keval Desai <[email protected]> wrote: > okay i am going to try it today and let you know how it turns out! > > On Mon, Jul 17, 2017 at 4:55 AM, Dennis Lee Bieber <[email protected]> > wrote: > >> On Sun, 16 Jul 2017 23:51:09 +0530, Keval Desai >> <[email protected]> declaimed the >> following: >> >> >yeah looks kind a that way , i am actually confused if HDMI is already >> >plug and play then it means HDMI chip is also getting input and that >> input >> >is my tft lcd requires what if i directly applies that to my tft lcd >> >will it gonna work ? >> > >> >> Page 38 of the SRM >> >> """ >> 5.13 HDMI Interface >> >> A single HDMI interface is connected to the 16 bit LCD interface on the >> processor. The 16b interface was used to preserve as many expansion pins >> as >> possible to allow for use by the user. The NXP TDA19988BHN is used to >> convert the LCD interface to HDMI and convert the audio as well. The >> signals are still connected to the expansion headers to enable the use of >> LCD expansion boards or access to other functions on the board as needed. >> """ >> >> The last sentence seems to apply... >> -- >> Wulfraed Dennis Lee Bieber AF6VN >> [email protected] HTTP://wlfraed.home.netcom.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit https://groups.google.com/d/to >> pic/beagleboard/IlcnTzl0-GE/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion on the web visit https://groups.google.com/d/ms >> gid/beagleboard/rbtnmcl0ur04etvevq1m1vg5uupgu55886%404ax.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOhc2ANh4MY2ThqS2ZZN%2BLTNru-%3D%3Dg9GSMKQ3g7L5TBGwMe4Cw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
