Thanks for the reply. How would I handle connecting to the internet in order to update? Can I use connmanctl similar to how I did the initial setup in Angstrom? Or do I need to buy a USB-to-Ethernet adapter and hook up to my router?
On Tuesday, July 25, 2017 at 2:23:38 AM UTC-5, Luther Goh Lu Feng wrote: > > 1. I believe you can only install the armhf version of Ubuntu > 2. In my general opinion, Debian Jessie is better supported on the > Beaglebone than Ubuntu. They are probably equally supported by Docker > > On Tuesday, July 25, 2017 at 11:06:15 AM UTC+8, Bobby Schmidt wrote: >> >> I recently got a BBBlue and had a couple of questions about creating a >> bootable mSD card with Ubuntu. >> >> 1. Can I use a full install of Ubuntu on the BeagleBone or am I >> restricted to ARM? >> 2. Is Debian Jessie a better option since its official image is shown on >> the beagleboard website and supported by Docker? >> >> >> I also have a question about what happens after creating a bootable mSD >> card. Can I SSH via USB to setup the wifi or is there another way to get >> the Wifi setup (e.g USB to ethernet adapter) >> >> >> Thanks >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/eb536372-58af-40b4-8282-bfffe2a962a4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
