Look at the link in /dev/rtc: ls -al | grep rtc
If you got it to point at /dev/rtc1, I would very much like to know how you accomplished that! On Friday, July 28, 2017 at 10:09:19 AM UTC-4, William B wrote: > > Greg, it's okay. I was able to make the RTC be recognized as rtc1 in the > system. Just turned off the BBB, disconnected everything that was connected > to the hardware and starts again. I'm sure the RTC module was properly > connected to the BBB, so I believe that there could only be some > configuration conflict going on. > > Thank you! > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/68e625e5-4c56-409a-b330-497e62547cef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
