Hi Stefano, Do I understand that you were able to get SPI1.1 (P9_42) working?
I can get SPI1.0 working with my BBB by disabling HDMI and loading BB-SPIDEV1 in uEnv.txt. This works with CS0, but this doesn't seem to allow me to use CS1. Any ideas? On Wednesday, June 29, 2016 at 8:54:18 AM UTC-7, RobertCNelson wrote: > > On Tue, Jun 28, 2016 at 4:30 AM, <[email protected] <javascript:>> > wrote: > > With this line in uEnv.txt I solved my problems with pins configuration > of > > PWM and SPI interfaces: > > > > cape_enable=bone_capemgr.enable_partno=BB-SPIDEV1,am33xx_pwm,BB-PWM0 > > > > Frankly, I don't know why now it is not possible to load these DTOs from > > Linux shell. > > I hope this will help. > > the pin's for spidev don't get correctly muxed if done from the > shell.. (aka something it too late..) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f1909f64-3124-41b5-a9ba-0e739357ced3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
