Jason, After the IP address changes I’m unable to log in.
Basically, I flashed with Debian 8.8, then ran the configure_robotics_dt.sh script. After rebooting, I can no longer log in. should be easy to duplicate. -K > On Aug 2, 2017, at 9:24 AM, Jason Kridner <[email protected]> wrote: > > Can you provide a journal log? > > Can you check the status of dnsmasq and connman processes? > > Which script are you calling the "DT script"? > https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/install.sh > > <https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/install.sh> > ? > https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/device_tree/configure_robotics_dt.sh > > <https://github.com/StrawsonDesign/Robotics_Cape_Installer/blob/master/device_tree/configure_robotics_dt.sh> > ? > > On Mon, Jul 31, 2017 at 6:08 PM Kurt Talke <[email protected] > <mailto:[email protected]>> wrote: > Hi Jason, James, > > I’m running Debian 8.8 from 7/1/17, and I’m having an issue where the BBB no > longer shows up as the default IP 192.168.7.2 > > I’ve narrowed it down to the script which enables the device tree overlay, or > installing the robotics cape from source code. > > Once I reboot, my BBB shows up as a self assigned IP 169.254.44.139, and I > can’t connect to it. > > The DT script works for 8.7, but not 8.8 or the 9.1 versions. > > Any ideas? > > > > -Kurt > -- > https://beagleboard.org/about <https://beagleboard.org/about> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/E11C7FFC-B7DB-48FC-874F-CBDA1B3DFB41%40eng.ucsd.edu. For more options, visit https://groups.google.com/d/optout.
