I have a 128GB SD Card, that I use in one of my laptops to store install files, some backups, etc. This machine runs Linux so the SD is formatted ext4. I used gparted to srink partition on this SD to 96GB and made another 32GB partition at the end. I then put this into my BBB. I could mount both partitions, I could write files to them and I did a fsck.ext4 -f on both again in my DELL laptop. No issues. Card is a Sandisk mmc0: new high speed SDXC card at address aaaa according to dmesg.
On Friday, July 18, 2014 at 12:05:01 AM UTC+2, Jonmar wrote: > > Greetings everyone, > > What is the maximum size SD or SDHC flash memory card that the "BeagleBone > Black" will support ? > > Also, what is the recommended speed class (e.g. Class 4, Class 10, etc.) ? > > Thank you in advance for your help :-) > > Jonmar > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/253ac8e1-2f3e-43b4-bbb6-282782925dd5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
