On Monday, March 23, 2015 at 6:27:06 AM UTC+3:30, Colin Bester wrote: > > In adding Audio Cape (BB-BONE-AUDI-02-00A0) to beaglebone black which also > has LCD4 mounted I receive a GPIO 19 conflict error. > > Looking at the dts file I see it has specified exclusive use for gpio1_18 > and gpio1_19. In the past I circumvented this error by commenting these two > pins out of the exclusive list and all works fine (doesn't appear that > these pwm pins are used by audio cape) > > Now I upgraded debian to 3.8.13-bone70 and in performing upgrade and > setting up new board I forgot to exclude these two pins from dts file > before compiling, only to see the conflict error again. > > My problem is that no matter what I do, (edit out pins, compile and copy > new dtbo to /lib/firmware), I keep getting the same conflict error. If I > edit the dts file and change the part number to something else and load it > manually it works so I know the change and compile is valid. >
> > It appears that my original compiled dtbo file is somehow being > cached/persisted through power off/power on and my updated dtbo is not > being 'seen'. > > I'd appreciate any suggestions on next steps. > > Colin > > Hello your problem solved? I have this problem, but not done? Can you help me in the end? fixed? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6936b9ac-cb98-4a69-826e-8e0eab857a20%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
