Oops, I'm sorry. If I only would have read this:
https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_Quick-Start-Guide.pdf page 3, I would have known to order the other accessories. IMO, it would still be great if the distributors could specify what comes in the box. Anyhow, it's booting a very late image of the kernel from eMMC... On Friday, August 18, 2017 at 10:21:23 AM UTC-5, gcoley1 wrote: > > It boots off the eMMC on the board. It does not require a SD card to boot. > > > > Gerald > > > > > > *From:* [email protected] <javascript:> [mailto: > [email protected] <javascript:>] *On Behalf Of *Jeff Andich > *Sent:* Friday, August 18, 2017 10:18 AM > *To:* BeagleBoard <[email protected] <javascript:>> > *Cc:* [email protected] <javascript:> > *Subject:* Re: [beagleboard] Re: Last hours for Arrow's 20% off sale and > X15's in stock at Digi-Key > > > > Last-night I received my BB-X15 at home. From the description on > DigiKey's website, I wasn't sure what comes in the box. > > > > As it turns out, just a populated PCBA in an electrostatic bag, no power > supply headers/standoffs, FTDI, default SD Card with the BBB-X15 image. > > > > > > ****Could the vendors please put a note on what comes in the box?**** > > > > > > Now I've got to order all of the obligatory accessories just to fire it up > (and maybe pay more shipping charges).... argh! > > > > Thanks! > > > > Jeff > > On Monday, August 14, 2017 at 10:40:36 AM UTC-5, Jeff Andich wrote: > > Attached a text file containing log of output of the dmesg command. > > > > *** Note: The dmesg command was captured from an earlier bootup session > than from the session with the abridged kernel log pasted above *** > > > > Thanks! jeff > > On Monday, August 14, 2017 at 10:15:26 AM UTC-5, Jeff Andich wrote: > > Here's the bootup log without the verbose mode flag enabled in uEnv.txt: > > > ********************************************************************************** > > > > U-Boot SPL 2017.01-00360-gc604741cb3 (Aug 11 2017 - 15:47:09) > > DRA752-GP ES2.0 > > Trying to boot from MMC1 > > > > ** Unable to use mmc 0:1 for loading the env ** > > Using default environment > > > > > > > > U-Boot 2017.01-00360-gc604741cb3 (Aug 11 2017 - 15:47:09 -0500), Build: > jenkins-github_Bootloader-Builder-592 > > > > CPU : DRA752-GP ES2.0 > > Model: TI AM5728 BeagleBoard-X15 > > Board: AM572x EVM REV A.3A > > DRAM: 2 GiB > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > > > > ** Unable to use mmc 0:1 for loading the env ** > > Using default environment > > > > setup_board_eeprom_env: am57xx_evm_reva3 > > SCSI: SATA link 0 timeout. > > AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > > flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst > > scanning bus for devices... > > Found 0 device(s). > > Net: <ethaddr> not set. Validating first E-fuse MAC > > cpsw > > Press SPACE to abort autoboot in 2 seconds > > usb_boot is currently disabled > > scsi_boot is currently disabled > > switch to partitions #0, OK > > mmc0 is current device > > Scanning mmc device 0 > > Checking for: /uEnv.txt ... > > Checking for: /boot/uEnv.txt ... > > 446 bytes read in 49 ms (8.8 KiB/s) > > Loaded environment from /boot/uEnv.txt > > Checking if uname_r is set in /boot/uEnv.txt ... > > debug: [uname_r=4.4.80-ti-r116] ... > > loading /boot/vmlinuz-4.4.80-ti-r116 ... > > > > 5487379 bytes read in 283 ms (18.5 MiB/s) > > debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 quiet] ... > > debug: [bootz 0x82000000 0x88080000:53bb13 0x88000000] ... > > ## Flattened Device Tree blob at 88000000 > > Booting using the fdt blob at 0x88000000 > > Loading Ramdisk to 8fac4000, end 8ffffb13 ... OK > > Loading Device Tree to 8fa9c000, end 8fac3782 ... OK > > > > Starting kernel ... > > > > [ 0.063779] /cpus/cpu@0 missing clock-frequency property > > [ 0.063800] /cpus/cpu@1 missing clock-frequency property > > [ 2.194996] dra7-pcie 51000000.pcie_rc: link is not up > > [ 2.540811] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode > > [ 2.547225] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode > > [ 2.639312] omap_voltage_late_init: Voltage driver support not added > > [ 3.537309] remoteproc0: failed to load am57xx-pru1_0-fw > > [ 3.542894] remoteproc0: request_firmware failed: -2 > > [ 3.547988] pru-rproc 4b234000.pru0: rproc_boot failed > > [ 3.555830] remoteproc0: failed to load am57xx-pru1_1-fw > > [ 3.562347] remoteproc0: request_firmware failed: -2 > > [ 3.567442] pru-rproc 4b238000.pru1: rproc_boot failed > > [ 3.581573] remoteproc0: failed to load am57xx-pru2_0-fw > > [ 3.588946] remoteproc0: request_firmware failed: -2 > > [ 3.594048] pru-rproc 4b2b4000.pru0: rproc_boot failed > > [ 3.603674] remoteproc0: failed to load am57xx-pru2_1-fw > > [ 3.610193] remoteproc0: request_firmware failed: -2 > > [ 3.615285] pru-rproc 4b2b8000.pru1: rproc_boot failed > > [ 5.899545] remoteproc0: failed to load dra7-ipu1-fw.xem4 > > [ 5.923242] remoteproc2: failed to load dra7-dsp1-fw.xe66 > > [ 5.932697] remoteproc3: failed to load dra7-dsp2-fw.xe66 > > [ 6.517022] pixcir_ts 4-005c: pixcir_set_power_mode: can't read reg > 0x33 : -121 > > [ 6.517027] pixcir_ts 4-005c: Failed to set IDLE mode > > > > Debian GNU/Linux 9 arm ttyS2 > > > > rcn-ee.net console Debian Image 2017-08-11 > > > > Support/FAQ: http://elinux.org/BeagleBoardDebian > > > > default username:password is [debian:temppwd] > > > > > On Monday, August 14, 2017 at 9:17:48 AM UTC-5, Jeff Andich wrote: > > Hi Robert, > > > > So far, so good. It boots and gives the "arm" prompt. Will collect some > cursory logs and post them back up here.. > > > > Thanks and regards! > > > > Jeff > > > > On Saturday, August 12, 2017 at 10:05:04 AM UTC-5, RobertCNelson wrote: > > Jeff, give this image a quick test: > > > https://rcn-ee.net/rootfs/2017-08-11/microsd/bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz > > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/c5942984-80cb-4749-9db6-5430308ccf04%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/c5942984-80cb-4749-9db6-5430308ccf04%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d000c1bb-92e6-4e6c-8fec-f9f707e6f3b4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
