On Thu, Aug 31, 2017 at 9:14 PM, Robert Nelson <[email protected]> wrote: > On Thu, Aug 31, 2017 at 9:10 PM, Jacek Radzikowski > <[email protected]> wrote: >> Now the cape overlay is not loaded at boot: >> # cat /sys/devices/platform/bone_capemgr/slots >> 0: ------ -1 >> 1: ---l-- -1 >> 2: ---l-- -1 >> 3: ---l-- -1 > > Correct, "slots" is technically disabled with u-boot overlays.. > >> >> An attempt to load the overlay manually results in the following messages: >> [ 890.202788] bone_capemgr bone_capemgr: part_number >> '/lib/firmware/DLPDLCR2000-00A0.dtbo', version 'N/A' >> [ 890.202837] bone_capemgr bone_capemgr: slot #4: override >> [ 890.221494] bone_capemgr bone_capemgr: slot #4: auto loading handled by >> U-Boot >> >> "echo /lib/firmware/DLPDLCR2000-00A0.dtbo > >> /sys/devices/platform/bone_capemgr/slots" just hangs and never finishes. > > run: > > sudo perl /opt/scripts/device/bone/show-pins.pl > > and you'll see the pinmuxing..
nm... that might be broken.. debian@test-bbbw-8:~$ uname -r 4.9.45-ti-r57 debian@test-bbbw-8:~$ sudo perl /opt/scripts/device/bone/show-pins.pl Died at /opt/scripts/device/bone/show-pins.pl line 57, <> line 3. pin 0 (PIN0): 481d8000.mmc (GPIO UNCLAIMED) function pinmux_emmc_pins group pinmux_emmc_pins Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYivRGMzxX%2B_Jk06HnVXuCtQ8U3MnZ7QWWs5brvrqqoBLw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
