Hi, I have been trying to tftp boot uImage.
Here is my setup: BBB is connected via USB cable to host. UBoot is configured for usb_ether. Uboot receives IP from DHCP server and loads uImage. The kernel starts. However, the booting does not progress further as (I think) NFS is not getting loaded. [ 1.553308] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.560933] hctosys: unable to open rtc device (rtc0) [ 1.583001] net eth0: initializing cpsw version 1.12 (0) [ 1.588374] net eth0: initialized cpsw ale version 1.4 [ 1.593624] net eth0: ALE Table size 1024 [ 1.600077] net eth0: phy found : id is : 0x7c0f1 [ 1.604893] libphy: PHY 4a101000.mdio:01 not found [ 1.609709] net eth0: phy "4a101000.mdio:01" not found on slave 1, err -19 [ 1.622369] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.622036] Waiting up to 110 more seconds for network. [ 21.622035] Waiting up to 100 more seconds for network. [ 31.622025] Waiting up to 90 more seconds for network. [ 41.622038] Waiting up to 80 more seconds for network. [ 51.622028] Waiting up to 70 more seconds for network. [ 61.622023] Waiting up to 60 more seconds for network. [ 71.622032] Waiting up to 50 more seconds for network. [ 81.622023] Waiting up to 40 more seconds for network. [ 91.622025] Waiting up to 30 more seconds for network. [ 96.002045] random: nonblocking pool is initialized [ 101.622030] Waiting up to 20 more seconds for network. [ 111.622026] Waiting up to 10 more seconds for network. [ 121.622030] Waiting up to 0 more seconds for network. [ 121.642057] Sending DHCP requests ...... timed out! [ 210.072933] IP-Config: Retrying forever (NFS root)... [ 210.078089] net eth0: initializing cpsw version 1.12 (0) Or is this a limitation of my hardware setup - only using IPoverUSB and no real eth connecting host and BBB. Could you kindly suggest me some debugging methods to fix this issue. Thank you! Best regards, Vishnu -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cc819362-3250-4772-945e-8725827df90d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
