Thanks Robert!! If the kernel device tree doesn't explicitly configure/re-configure a pad (e.g. pinmux, iodelay) then will the kernel leave an existing pad configuration performed by the SPL alone? In other words, if you setup a pad configuration in the SPL do you need to mimic that configuration in the kernel's device tree or only the items you want to change in the kernel ?
Now that I can build a working u-boot again (thanks to the post about u boot image size) I will try varying pinmux separately in he SPL and the kernel dev tree to try to get data visible on UART1 or 5 on the expansion header... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/797bcfc4-daee-4a9d-898b-8fe2071f1c1e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
