Hi all,
We're beginning a new project and will be using the new Ocatvo
OSD3358-SM part. My question is quite simple, which kernel version to
use, 4.4, 4.9 or 4.14. I know there are a thousand factors that could be
considered, but generally with all things being equal, should we just
jump to the 4.14 kernel and push forward. Only looking for general
responses, no better/worse flames. We'll only need to modify a LCD dts
for the display we'll be using and use existing UART, SPI and I2C
overlays, so there are no real unique requirements of any of the kernels.
Ideas, comments, suggestions are all welcome.
Thanks,
--
Ross Morrison
Electronics International Inc
(541) 318-6060
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/ef470f38-1ed4-0d2b-5b9c-a35f70428d3f%40buy-ei.com.
For more options, visit https://groups.google.com/d/optout.
