Hi, Trying to enable timer4 in Beaglebone black 3.8.13-bone79 following the thread:
https://e2e.ti.com/support/arm/sitara_arm/f/791/t/415079 where a platform driver is created to configure the dmtimer/timer4. DT is used to set output pin for timer4. My problem is I couldn't seem to set the pinmux for timer4. And after insmod <timer_driver>.ko, nothing seems to happen, the /proc/interrupt shows no interrupt no allocated. Any idea what possibly went wrong? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/aa48e1bb-7856-4767-a5c3-29c622a2f5c2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
