On Wed, Oct 4, 2017 at 5:06 AM, <[email protected]> wrote: > Hello all, > I am struggling with booting the beaglebone green from sd card. When beagle > bone connected with custom carrier board then sysboot[15:14] state is 00b > due to carrier board connections. There is no issue when booting from emmc. > MMC Clock frequency for different sysboot[15:14] are shown below. > MMC0 clock is 60MHz when sysboot[15:14]=00b > MMC0 clock is 48MHz when sysboot[15:14]=01b > MMC1 clock is 48MHz in all conditions, and it is boot from emmc without any > issue. > How can i solve this issue without changing my custom board connections.
Simple, you change your custom board connections.. This has been documented in all the SRM's since the first BeagleBone (White) was built.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgxbdRv7q86BtLJv5Y2DN8BEYTN4YjFKSK69MzZv0kP4Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
