Hi, Second partition "mmcblk0p2" is of which type ( ext2, ext3 or ext4)?.
are you are making partition? Regards, Madhu On Fri, Oct 6, 2017 at 11:20 AM, Ashish Maurya <[email protected]> wrote: > Also one more thing to notice is that this is causing problems when I boot > from sd card but no problem when booting from inbuilt emmc. > > > On Fri, 6 Oct 2017 at 10:17, Ashish Maurya <[email protected]> > wrote: >> >> I am powering up the board via USB cable connected to my laptop. Is it >> sufficient ? >> Or if not then what are other ways to do it Thanks. >> >> On Mon, Oct 2, 2017 at 3:57 PM, terra ÜÝÜ <[email protected]> wrote: >> > I had this, when power supply was not 5V stable >> > >> > On Tuesday, 26 September 2017 18:12:19 UTC+10, Ashish Maurya wrote: >> >> >> >> This is what I doing... >> >> >> >> U-Boot 2014.04 (Sep 21 2017 - 11:25:07) >> >> >> >> I2C: ready >> >> DRAM: 512 MiB >> >> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> >> Using default environment >> >> >> >> Net: <ethaddr> not set. Validating first E-fuse MAC >> >> cpsw, usb_ether >> >> Hit any key to stop autoboot: 0 >> >> U-Boot# >> >> U-Boot# fatls mmc 0:1 >> >> 76868 mlo >> >> 329548 u-boot.img >> >> 4964640 uimage >> >> 26024 am335x-boneblack.dtb >> >> system volume information/ >> >> >> >> 4 file(s), 1 dir(s) >> >> >> >> U-Boot# fatload mmc 0:1 0x80600000 uImage >> >> reading uImage >> >> 4964640 bytes read in 1714 ms (2.8 MiB/s) >> >> U-Boot# fatload mmc 0:1 0x80500000 am335x-boneblack.dtb >> >> reading am335x-boneblack.dtb >> >> 26024 bytes read in 19 ms (1.3 MiB/s) >> >> U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw' >> >> U-Boot# print bootargs >> >> bootargs=console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw >> >> U-Boot# bootm 0x80600000 - 0x80500000 >> >> ## Booting kernel from Legacy Image at 80600000 ... >> >> Image Name: Linux-3.12.1-bbb >> >> Image Type: ARM Linux Kernel Image (uncompressed) >> >> Data Size: 4964576 Bytes = 4.7 MiB >> >> Load Address: 80008000 >> >> Entry Point: 80008000 >> >> Verifying Checksum ... OK >> >> ## Flattened Device Tree blob at 80500000 >> >> Booting using the fdt blob at 0x80500000 >> >> Loading Kernel Image ... OK >> >> Using Device Tree in place at 80500000, end 805095a7 >> >> >> >> Starting kernel ... >> >> >> >> >> >> >> >> This is how I built the images- >> >> Using linux-3.12-bone-black kernel. >> >> make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- zImage modules >> >> dtbs >> >> make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage >> >> LOADADDR=0x80008000 >> >> make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- modules_install \ >> >> INSTALL_MOD_PATH=/mnt/rootfs >> >> make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- \ >> >> uImage-dtb.am335x-boneblack LOADADDR=0x80008000 >> >> >> >> SD card has two partitions, first fat and another ext2. First contains >> >> - >> >> MLO,u-boot.img,uImage,am335x-boneblack.dtb >> >> second contains rootfs. >> >> >> >> Not getting where I am doing wrong, please help... >> >> Thank You. >> > >> > -- >> > For more options, visit http://beagleboard.org/discuss >> > --- >> > You received this message because you are subscribed to a topic in the >> > Google Groups "BeagleBoard" group. >> > To unsubscribe from this topic, visit >> > https://groups.google.com/d/topic/beagleboard/hg30MOAJTd0/unsubscribe. >> > To unsubscribe from this group and all its topics, send an email to >> > [email protected]. >> > To view this discussion on the web visit >> > >> > https://groups.google.com/d/msgid/beagleboard/5975c40d-67ae-4567-9362-dc5a1829ec37%40googlegroups.com. >> > >> > For more options, visit https://groups.google.com/d/optout. >> >> >> >> -- >> Ashish Maurya >> Mob - 9545752036 >> LinkedIn - https://www.linkedin.com/in/ashish-maurya-3b95a149/ > > -- > Ashish Maurya > Mob - 9545752036 > LinkedIn - https://www.linkedin.com/in/ashish-maurya-3b95a149/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAMhEQEn_q5BZjyQ7y-yOQ%2BkFArVU_VyjFpspk1gvf8pSgcMK2g%40mail.gmail.com. > > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAA2oCOmgNwDxiH3f7Wy70k1BGi4Dru%3D2wBjN3S07%3D2F_pNeXHw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
