Hello every one, I'm working on a robot that is control thanks to a camera. To send images to a smartphone, I implement mjpeg_streamer. The problem is that when I'm working in a place with lot of WIFI (an apartment for example) there is 2 seconds of latency, so I tried to disable default access point (AP) of the BeagleBone Blue to not over charge the BeagleBone, Blue. To do so I use connmanctl :
connmanctl> tether wifi disable Error disabling wifi tethering: Already disabled But the BeagleBone Blue is still in AP mode. When I tried to enable a new AP, it works for a while but after a moment the default AP was back. I guess there is a service that makes sure that the Default AP is on. Does someone know how to disable the default AP mode ? Thanks so much for your help ! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7663973f-a137-4088-97ad-da49987d99cf%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
