On Fri, Oct 13, 2017 at 1:39 PM, Steven Napolitano <[email protected]> wrote: > I guess you remembered! You're incredible...truly. That worked...and I get > the same incorrect voltage as I did when using Debian 8. Perhaps this isn't > a kernel issue? I guess this is a hardware issue? Again I tested the > voltage at the P9_39 pin with a multimeter. Meter reads 200mv ADC raw input > on AIN0 is 465mv.
Hi Steven, Was the 465 value directly from reading the "raw" value? cat /sys/bus/iio/devices/iio\:device0/*_raw 465 * (1.8V / 4096) = 204.3mV Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiBsHKZGc3W2VLCbSnFbF9Bj%3D8OgUgTtMRyAGaF2sdXrA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
