Hi, I'm seeing a ton of messages like this in syslog: Oct 14 16:58:45 beaglebone wpa_supplicant[1047]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-40 noise=9999 txrate=117000 Oct 14 16:58:47 beaglebone wpa_supplicant[1047]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=0 signal=-50 noise=9999 txrate=117000 Oct 14 16:58:48 beaglebone wpa_supplicant[1047]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-40 noise=9999 txrate=117000 Oct 14 16:58:49 beaglebone wpa_supplicant[1047]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=0 signal=-50 noise=9999 txrate=117000 Oct 14 16:58:53 beaglebone wpa_supplicant[1047]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-40 noise=9999 txrate=144400
I've searched a bit, and it seems to be associated with wifi problems, but the board is close to the hub, and I'm not experiencing any problems.** Any ideas? Thanks, /Clyde **Well, actually 1 problem: wifi is the long pole in the boot process at around 30s, which I'm also trying to figure out. Still, it always comes up after waiting for 30s, and then it stays up. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c24758bf-8feb-415d-9f44-72a883a4a17d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
