Hi all, Sorry for conveying my confusion. No need of using Multi Master mode or slave mode for communicating with a Microcontroller through I2C. BBB may be put in Master mode only.
Thanks & Regards, Sajeevan.K On Saturday, October 14, 2017 at 4:48:02 PM UTC+5:30, sajeevan k wrote: > > Hi all, > > > I have already done interfacing BBB with slave devices such as RTC with a > finite slave address. Now I am in need of communicating BBB > with a Micro Controller through I2C interface. The way in the RTC is > interfaced is not working in this case. In this case, BBB need to be either > in Multi Master mode or slave mode. > > Is it possible to make BBB working in I2C Multi Master mode or slave mode. > Is Mutli Master/Slave mode supported by kernel? Drivers available? > Is there any sample .dts file for configuring i2c in Multi Master/Slave > Mode. > > > Thanks & Regards, > Sajeevan.K > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/595efc55-0080-4124-89a0-4fc866079418%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
