Hi Philip, On Fri, Oct 27, 2017 at 12:14 PM, Philip Munts <[email protected]> wrote: > While testing a 7 Segment Click, I found an error in > am335x-pocketbeagle.dts: The mode for P2_25 (SPI1 MOSI) should be 4 > (spi1_d1), not 5 (spi1_cs0). > > @@ -660,7 +660,7 @@ > > /* P2_25 (ZCZ ball E17) */ > P2_25_default_pin: pinmux_P2_25_default_pin { pinctrl-single,pins = < > - AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* > uart0_rtsn.spi1_cs0 */ > + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* > uart0_rtsn.spi1_d1 */ > P2_25_gpio_pin: pinmux_P2_25_gpio_pin { pinctrl-single,pins = < > AM33XX_IOPAD(0x096c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* > uart0_rtsn.gpio1_9 */ > P2_25_gpio_pu_pin: pinmux_P2_25_gpio_pu_pin { pinctrl-single,pins = < > @@ -668,7 +668,7 @@ > P2_25_gpio_pd_pin: pinmux_P2_25_gpio_pd_pin { pinctrl-single,pins = < > AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* > uart0_rtsn.gpio1_9 */ > P2_25_spi_pin: pinmux_P2_25_spi_pin { pinctrl-single,pins = < > - AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* > uart0_rtsn.spi1_cs0 */ > + AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* > uart0_rtsn.spi1_d1 */ > P2_25_i2c_pin: pinmux_P2_25_i2c_pin { pinctrl-single,pins = < > AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* > uart0_rtsn.I2C1_SCL */ > P2_25_uart_pin: pinmux_P2_25_uart_pin { pinctrl-single,pins = <
Thanks for testing! Just merged the same fix, just a moment ago.. "tools/pinmux-generator/PocketBeagle.dts" https://github.com/beagleboard/bb.org-overlays/commit/ef1a508c7b6d84ab5e8051bed0850a0e41b51b79#diff-a306673b182b4b3570e3598007b6dcb0 I've split the "spi" to, spi, spi_cs, spi_sclk (and also brought the can pins out) i'll have updated 4.4.x/4.9.x/4.14.x-ti kernels out later today, with this new default.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiROdgeDHtk1R3mqMxcL6m0P7RdQdh_No9iGxOAJhWZuA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
