Long story short. When the eMMC has the first, and second stage bootloader installed on it. The board will always load these from the eMMC, and then load the rest from the sdcard when one is inserted.
The result is that one can be put into a non working state, because there would be a MLO / uboot / kernel conflict. There are two ways to solve this, Robert already mentioned one. The other would be to press, and continue to hold the boot button on the board so that it loads MLO, and uboot form teh sdcard instead. I've heard mention of some people having difficulties with this, and instead short the boot button. BUt I've not done that personally. In the end, it would probably be easier to do as Robert suggests above. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORpxXW4kJAXA6HMfJO7fbZsU9kw3vtNqGHxz3DOd-6%3DpoA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
