On Fri, Nov 10, 2017 at 7:47 PM, Tom Dison <[email protected]> wrote: > Thanks, I soldered the headers on, uncommented the lines in uEnv.txt, and > got the ETH-WIZ-CLICK working. I'd like to get the Wifi click working, but I > don't see an appropriate entry in /lib/firmware to use. I'd also like to get > the RS-232 Click to work, but it looks like the USB-UART is the easiest to > try next. > > I also bought a click adapter for RPI so I can play with the boards on RPI > also.
All the wifi boards look to be uart based.. Just use the "config-pin Px_yz uart" option on both rx/tx.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiryUHQWZ61QTPyOUGS4HzgM0ibib3tKiCPSwty3Jn45Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
