It can be trusted. Does not matter whether one pushes RST (reset) button or plugs in power as long as SD card is in first and then SD button is held down and only after this power it up. Make sure to use BBBL images (not BBB like I at first did ;-)) and be patient when botting, i.e. it will show a cylon effect after some time of heartbeat flashing. When finished all blue LEDs will be either fully on indicating error I guess (at least it was like this for me) or all will be 100% off ready to remove SD card and boot up.
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/229efa9c-24db-4ab8-9bf2-1df14d819a97%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
